Media · Blog
Production is not static. The systems that run it still are.
Our positions on the next generation of industrial systems: dynamic scheduling, the AI-augmented operator, open ecosystems. What we are building, and why.
Expert guide
Aeronautical MRO inventory management: how to avoid component shortages?
Why a 99% MRP Service Level Is Not Enough in Aerospace MRO In aerospace maintenance , logistics performance is often assessed using reassuring indica…
Expert guide
Challenges of scheduling in aviation MRO
Regulatory Compliance and Financial Performance: The Strategic Edge FAA Regulatory Alignment and Part 145 Compliance In the United States, maintainin…
ZOZIO viewpoint
[ 4.0 Editorial ] Optimizing your production with Just-in-Time Manufacturing
At the verge of the 3rd Industrial Revolution, the Lean Manufacturing cut a path through better production performances. Recently, as the plants’ com…
ZOZIO viewpoint
[ Interview 4.0 ] George Elias, Zozio : « Most ERPs aren’t enough to manage intermediate status »
George Elias is Technical Sales Manager for France and Sales Manager North America dedicated to Zozio’s development in the United States. We intervie…
Expert guide
8 challenges faced daily by cosmetics manufacturers
Challenge no. 1: Production scheduling To plan production with all the necessary information to hand, several prerequisites are required: Having exce…
Expert guide
The ATEX standard in the cosmetics and pharmaceutics industry
The pharmaceutical and cosmetic industry, due to the large quantity of chemical products stored and used in the laboratory and in the production area…
Expert guide
Limiting the impact of equipment failures on production through curative and corrective maintenance
Curative maintenance is akin to repairing defective or damaged equipment. This type of maintenance is generally emergency maintenance, as it involves…
Expert guide
What are the differences between a TMS and a WMS?
In this article, we will define what a TMS and a WMS are, and we will establish the advantages and differences that exist between these two systems.…
Expert guide
How to Increase the Overall Equipment Effectiveness (OEE) of Your Production?
What Is Overall Equipment Effectiveness? Overall Equipment Effectiveness (OEE), also known as the taux de rendement synthétique (TRS) in French, is o…
Expert guide
The 5S Method: The Essential Lean Management Tool
What Is the 5S Method? As we briefly mentioned in our article "Lean Manufacturing: Discover the Essential Tools and Methods!" , the 5S meth…
Expert guide
What is a bottleneck and how can you limit its impact to optimise production?
What is a bottleneck? On a production line, a bottleneck is a workstation that receives more work than it can handle at its maximum production capaci…
Expert guide
Short Interval Management (SIM): an Essential Lean Management Tool
What is Short Interval Management (SIM)? Short interval management (SIM) is a key Lean Management tool. Its objectives are to share common goals by d…